Wall-mounted integrated filtration equipment WL-HYT20Y

This device integrates multiple functions, including filtration and hydrotherapy massage. Equipped with a water pump, stainless steel handrail, underwater lights, LED landscape lights, jet massage nozzles, and step treads, it is suitable for various types of swimming pools.

Wall-mounted integrated filtration equipment WL-GYT10Y

Embedded integrated filter device WL-EYT25

The chassis is made of gel coat material, and the cover is made of high-quality acrylic material. It uses quartz sand filtration for high filtration accuracy and easy backwashing. It requires no equipment room, saving on equipment room construction costs and eliminating the need for other ancillary facilities. Operation is convenient.

Wall-mounted integrated filtration equipment WL-AYT25Y

The enclosure is made of high-quality acrylic material, which is acid and alkali resistant, easy to clean, and does not easily discolor. It requires no equipment room, is easy to install and operate, and has low management costs. (For example: ① No pre-embedded sleeves are required, avoiding damage to the pool structure; ② No equipment room is required, saving on equipment room construction costs; ③ No external pipes need to be installed, avoiding long-term subsidence and deformation of the pool body leading to pipe breakage; ④ Compared with an equipment room, no other special equipment and specific requirements such as ventilation and drainage are required)

Smart swimming pool spa processing unit WL-DYT12C

Automated pool and spa water treatment units are assembled using a combination of advanced equipment, configured in a machine room to save on installation, material consumption, and machine room management costs. They provide optimal solutions for home pool and spa water treatment.

Embedded integrated device WL-DYT30

The embedded integrated unit is made of high-quality acrylic material, which is sturdy and corrosion-resistant. It is equipped with a water pump, paper core filter, chemical feeder, and other devices, and has water pipes and inlet/outlet ports, allowing for more thorough pool water filtration and effectively avoiding dead zones. This equipment can be optionally installed underground around the pool, eliminating the need for a separate equipment room, saving on equipment room construction costs, and is convenient to operate and install, with stable performance.

Integrated filtration equipment WL-DYT20

The rear casing is made of high-quality acrylic material and uses quartz sand filtration for high filtration accuracy and simple backwashing. It requires no equipment room, saving on the cost of building an equipment room and eliminating the need for other ancillary structures, making it easy to operate. It is equipped with a water pump, sand tank, chemical feeder, and other devices, with water pipes and inlet/outlet ports arranged to ensure thorough water filtration and prevent short-circuiting and dead zones. Depending on the piping method, it can achieve functions such as circulating backwater, sludge suction, and drainage.

WL-BYT25J integrated underground filtration equipment

The shell is made of high-quality acrylic material, with a beautiful appearance and exquisite design. No equipment room is required, it is easy to operate and has low management costs. This filter can be installed at any position outside the swimming pool, with water pipes and inlets and outlets arranged to ensure more thorough pool water filtration and avoid short circuiting and dead corners.

Three-in-one dehumidification heat pump

At the cost of slightly higher power consumption, a large amount of free thermal energy from the air is extracted and utilized. 80% of the latent heat in the humid air is recovered during the dehumidification process, making it a renewable energy source that saves energy and reduces emissions. Compared to traditional ventilation and dehumidification, it saves an average of 40%~60% in costs. In constant temperature + dehumidification mode, the overall energy efficiency ratio of the unit is optimal.

Commercial hot water heat pump unit

Using high-quality copper tube heat exchangers, the system boasts stable performance and rapid heating. Cold water entering the unit is immediately converted into stable hot water, which is then replenished into the water tank, truly achieving on-demand heating. Intelligent control and cyclical insulation ensure readily available hot water, enhancing temperature comfort and expanding usage scenarios.

Hot spring spa heat pump unit

Using "PPR+titanium tube heat exchanger" technology, comfortable hot water from 0-60℃ can be provided for the hot spring spa pool. The PPR shell and connecting pipes are more resistant to high temperatures than PVC materials.

Swimming pool dedicated heat pump unit

Suitable for various international professional competition pools, school pools, hotel pools, real estate community pools, private luxury leisure pools, and other places with strict requirements for pool water temperature.

Ultra-low temperature heat pump unit

To meet the special needs of extremely cold regions in northern China during winter, LASWIM (Weilangs) heat pumps are specially customized for users with ultra-low temperature models! Swimming pool dedicated heat pump units, hot spring spa heat pump units, and commercial hot water units are all available in ultra-low temperature models for customers to choose from.

Inlet and outlet WL-AJJH05

Return water inlet WL-AJJH04