NEWS

What are the basic daily maintenance procedures for swimming pool equipment?


Published:

2022/06/27

For pool managers, in addition to daily cleaning and surrounding environment maintenance, daily maintenance and management of the pool Pool Equipment Inspection and maintenance are also very necessary. Otherwise, it is easy to cause equipment damage, affect the water treatment effect, and affect the normal use of the swimming pool. So what should be paid attention to for the maintenance of the swimming pool? Let's learn about the basic operations of daily maintenance of pool equipment below?

 Pool Equipment.png

1. Regularly check and clean the debris basket

When cleaning, do not tap the dust collector lightly. If the trash can is damaged, it should be replaced in time. For outdoor swimming pool equipment in summer, especially during the rainy season, pay attention to prevention and avoid algae growth, and add algaecide as soon as possible before thunderstorms. An important factor affecting water quality in swimming pool equipment common sense is the PH value. There are many swimming pool heating equipment on the market, but most heating equipment is easily affected by the weather. Make full use of the advantages of health concepts, explore the connotation of hot springs, create innovative products, and improve the quality of hot spring hotels.

2. Regularly check the sealing ring of the pump head cover

If damaged, replace it in time, keep the motor clean, and keep the motor ventilation holes unobstructed. Occasionally, the motor shaft seal ring should be replaced in time. In winter, the accumulated water in the pump head should be removed, the inside and outside of the pump should be cleaned, and the pump should be stored in a dry and ventilated room. After putting the coagulant into the pool equipment, let the circulation system run for half an hour as much as possible. If flocculent precipitates are found in the water, let it stand, and then use the sewage removal equipment to remove the precipitates.

In short, the basic operations of daily maintenance of pool equipment include regularly checking and cleaning the debris basket and regularly checking the sealing ring of the pump head cover. This leads to unstable operation of the unit. The heat pump can prevent freezing caused by low temperatures in winter and overheating caused by high temperatures in summer. Swimming is a very good sport, but it is also a risky sport. Therefore, swimming safety and swimming pool hygiene should be paid attention to. On the other hand, swimmers themselves should also improve their self-protection awareness and the awareness of maintaining public hygiene and civilized swimming.

keywords