The working order of the swimming pool circulating water treatment process is :
First, filter out impurities in the water, and at the same time add a certain amount of flocculant to make the suspended matter in the water form flocs, creating good conditions for filtration. Then, increase the pressure with a water pump and enter the filter. After the water quality processed by the filter reaches a certain clarity, add chemical disinfection, and then transport it back to the swimming pool.
If the swimming pool water needs to be heated, use a heater to raise the water temperature to the required temperature.
I. Brief introduction of swimming pool circulating water treatment process
1 Respiratory oxygenation —— Increase the dissolved oxygen in the water body to make the water body fresh and active
2 Hydraulic flotation —— Remove organic and inorganic substances in the water body
3、 Gravity micro-pressure fine filtration—— Retain suspended solid particles
4、 Chlorine liquid pulse disinfection—— Kill harmful bacteria in the water body and improve the water body's own immunity
5、 Automatic drainage function—— Discharge impurities intercepted on the interception surface
II. Working principle of swimming pool circulating water treatment process
Swimming pool circulating water treatment process: The pool water passes through the return water pipe, and under the pressure of the circulation pump, it is filtered, heated, and disinfected through the circulating water treatment equipment. The circulation pump's hair collector first intercepts the hair and large floating objects in the water to prevent the hair from winding around the impeller of the pump. After the water flows out under pressure through the pump, a coagulant is added, and a coagulation reaction occurs in the pipeline, coagulating the tiny suspended matter in the water, producing Alum floc ” ，filtered and intercepted by a high-speed filter. The filtered pool water is partially heated by a heat exchanger, mixed with another part of the pool water, then a disinfectant is added to kill bacteria in the water, maintaining a certain amount of residual chlorine, and a certain amount of algaecide is added to prevent the generation of algae that make the pool water turn green, adjusting pH value, and the pool water returns to the pool. In addition, if the water PH value does not meet the requirements, acid-base adjustment is also required to make the pool water reach a certain acidity and alkalinity requirement, so that the various indicators of the circulating water treatment should meet the requirements of national standards.
Guangzhou Huidi is not only a professional swimming pool equipment supplier, but also a professional design, planning, and construction integrated hot spring engineering service provider, committed to "Quality First", providing customers with the best quality service from beginning to end.
13928794545
