NEWS

Home

Preparations for the opening of the swimming pool

Published:

2020/07/15

The cleaning and disinfection preparations before the swimming pool opens are as follows:

1. Check: Check if the equipment and disinfectants are available and sufficient

Before the swimming pool opens, it is necessary to check if the detection equipment is available, especially the readings and error correction of chlorine value and probe detectors, in order to provide accurate information for water management and judge the disinfection of the pool water. Check if the detection equipment and agents are expired, available and sufficient.

2. Cleaning: Clean the pool body and the surrounding pool walls

Thoroughly remove debris inside and outside the pool to prevent debris from entering the swimming pool, remove all leaves and debris, prevent any excess debris from entering the filtration system, reduce interference from foreign substances, and ensure that the detected values accurately reflect the health of the water body. Foreign pollutants will seriously affect the pH value of the water, and changes in pH value will seriously affect the judgment of the oxidation-reduction potential (ORP) value. In some older pools, black water lines are easily formed on the pool walls, so special agents need to be used for water line cleaning.

3. Check: Check the pool body and overflow drain

Check for damage or cracks in the tile or steel joints of the pool body and water flow channels. In addition to considering the bearing capacity of the pool wall when a large amount of pool water enters the pool body, the soil and foreign substances in the cracks will also pollute the pool water, especially the overflow water recovery water flow channel, the water flow will flush foreign substances into the filtration system, causing the filtration system to be overloaded. Repairing waterway damage can greatly reduce water chemistry costs. For concrete and fiberglass pools, it is particularly important to find waterway cracks, uneven walkways or slopes where water accumulates.

4. Disinfection: Disinfection of pipelines, filters, and heating equipment

Clean pipelines and good filters are the key to ensuring clean pool water. Therefore, when cleaning filters, pipelines, plate exchangers and other equipment, sterilization treatment is also needed to reduce environmental variables and pollution sources, and ensure that the physical and chemical parameters such as flow rate, pressure, and online detection of the swimming pool can accurately reflect the current situation of the swimming pool.

5. Water injection: Inject clean running water

When injecting new water, the water quality must be clean and cannot be polluted water, water that is about to become anoxic, or water that breeds bacteria. Therefore, it is particularly important to check for pollution in the water source transportation channels, processes, and reservoirs.

6. Adjustment: Water quality adjustment

Adding the right amount of disinfectant will make the pool water clean and healthy, but if the residual chlorine is too low, bacteria or viruses will breed and pollute the pool water. Therefore, adjusting the pool water follows the principle of "prevention is better than cure". Before opening, adjust the pH of the pool water, or remove urea and other conditions that may weaken chlorine or form nitrogen chlorides and other potentially harmful substances.

7. Test: Test the water

To ensure good water transparency, pollutants in the water body and water surface should be removed during continuous circulation and filtration operation, and supplemented by physical (flow rate, pressure) and chemical (pH, chlorine, ORP) parameters to prove that the operation is normal. To ensure the accuracy of the test results, it is necessary to compare and calibrate with the detection tools of the epidemic prevention department to avoid errors in the cycle.

Guangzhou Huidi Is not only a professional swimming pool equipment supplier, but also a professional hot spring engineering service provider integrating design, planning, and construction, committed to "quality first", always providing customers with the best quality service.

13928794545

keywords

Outdoor swimming pool water quality maintenance on rainy days

Five basic steps to maintain a swimming pool

Outdoor swimming pool water quality maintenance on rainy days

Five basic steps to maintain a swimming pool